Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose a key may worry about the cost and inconvenience to replace it. You can avoid these expenses by making your own key fob.
You'll require a flathead screwdriver to accomplish this. Place the flathead screwdriver into the slot located in the middle of the case and then slowly lift it.
Cost
Most SAABs have two keys when new, however certain used vehicles only have one. In this situation the owner has to purchase a new key, which is costly. There are a lot of ways to cut costs on this procedure. For example, if you simply require a new key fob case and you want to save money by buying a used case at a dealership. These cases do not have the emergency badge or key, and tend to wear out fast.
In addition to the cost of purchasing a new key, you also have to pay for the installation and programming of the TWICE module. These costs can add up quickly particularly if you do not have an extra.
It is vital to have two keys for your vehicle. If you lose only one key, you will not be stranded with no transportation.
The good news is that adding a second key to your Saab 9-3 is not as difficult as it might seem. The only major problem with this is that the key needs to be paired with your car's computer. This can be accomplished by a dealer, however it could take a while to schedule an appointment. Luckily, you can find the information you need online to assist you with the process.
Installation
Most Saab cars built since 1995 have an immobilizer system that utilizes a key-fob for controlling the car's engine. This system also controls door locks and remotes for the vehicle. It is vital to have an extra spare key in case you lose your original key or having your vehicle taken. The positive side is that if you lose your only functioning Saab key, there are ways to get it replaced without the need to pay for an expensive dealer service.
You must first prepare the new keyfob. To do this, you will need a flathead screwdriver to open the case. Place the screwdriver in the small opening in the middle of the case, and then gently work the screwdriver. If you're having trouble, try using different angles. Once you've opened up the case, you'll be able to remove the electronics and put them in a brand-new fob case.
Once you have the replacement fob and the key, you can begin the programing process. You'll need to connect your Tech2 to the computer and follow the steps for NG 9-3 with or without transponders. It is advised to get a replacement unit TWICE that is already fitted with the correct transponder and key. This unit is available on the internet. However, it is important to be sure to use an OEM replacement.
Programming
In general, adding an additional key for the Saab 9-3 needs a special tool called Tech 2. Tech 2. It also requires programming the car to recognize the new key. saab replacement key is more complicated than simply copying the metal key and it must be done by a professional in order to ensure that the car's electronic system. It is recommended to insert an extra car key as soon as you can. If you put off, it could cost a lot more in the future.
In addition to adding the replacement key, you'll have to replace the TWICE or CIM module. This is usually an order by mail and not something you can accomplish with an aftermarket supplier. The cost of a new car can be high, depending on the car model.
There's an alternative to the dealer who is charging you top dollar to replace the car computer. S.A. Locksmith & Security can re-program the EEPROM on your Saab computer and prepare the vehicle for the new key, thereby saving you the expense of a brand new car computer! This service is quick and cost-effective, as well as easy. You can save up to 50% of what an auto dealer would charge. This is a great option for people who have lost their car keys.
Remotes
The Saab 9-3 Viggen was one of the most distinctive cars that ever wore the Saab badge. It was an Scandinavian, front-drive, fighter jet-inspired beast that was fast as hell and fun to drive. There were many other Saab models followed, but none were as unique.
If you own a Saab 9-3, and lose your key fob, it's important to replace it as soon as you can. Saab vehicles come with an immobilizer device that requires a key that is unique to activate. If you have a spare, the replacement process is fairly easy. However, if you don't have one it can be costly and time-consuming.
You can save money by purchasing an used replacement key fob and having it programmed by a locksmith in your area. You should be cautious when buying used keys from eBay and other online outlets. They may not be authentic and you could end paying more in the long run.
The removal of the battery and electronic components from the old key fob is a straightforward procedure that anyone can complete with a small flathead screwdriver. Be sure not to harm the tiny electronic components within the case. You should also avoid putting liquids on the inside of the case, because it could cause damage. Also, do not purchase a key cloned from any other aftermarket seller because they might not work with your car's CIM.